The Guitar Dater Project - Fender Serial Number Decoder
Product Dating. Find out exactly when your instrument How can I find out when my Mexican-made instrument was manufactured? How can I find out when my. The Fender Duo-Sonic is an electric guitar launched by Fender Musical Instruments In Fender released a Mexican-made reissue Duo-Sonic in a ". The most important thing to keep in mind when dating a Fender is the .. For Mexican Fenders made in the s, the serial will start with an.
There in the neck pocket was a stamp that said Squier. I was initially horrified thinking I had a cheaper body stuck on the guitar neck, but turned to the internet to try to learn what was going on. Before I'd played with this guitar I hadn't suspected that it was anything other than a Fender Stratocaster. The body was a lot more solid and heavier than the Squier Stratocasters I had tried from the same era.
It all felt right and sounded great.
Early MIM Strat Dating
I couldn't believe that this was actually a cheaper built Squier, it felt too good! As it turns out, Squier in this case signifies something different to the Squier brand. So, I set off on searching to try and see if I could figure out what was going on. My searching led me back toand a budget range of Fender Stratocasters, that were most definitely not the lesser Squier, but something else instead.
Fender Vs Squier Firstly I think for those who are new to Fender and Squier guitars, it's worth giving a quick overview of what the differences between the two brands are.
Firstly, Fender have been producing guitars since the s.
Their history is well covered elsewhere, but for the electric guitar fan, they are one of, if not thee premier guitar brand. With classic and often copied models such as the Fender Stratocaster and TelecasterFender guitars are omnipresent in the music world. Despite their undoubted appeal to guitarists, there is one barrier that will stop many players from owning a Fender, and that's their price.
Whilst not as heavy as some other guitar brands, the prices would be a cut to high for many. With this in mind, Fender introduced the Squier range of guitars back in The brand was Fender's budget solution, giving them the ability to use their classic guitar designs at affordable, entry level prices.
Whilst the Squier brand utilised these classic and sort after Fender models, they were able to build them for a lot cheaper to make their budget range a huge success.
The guitars were built with cheaper woods, cheaper components and cheaper labour in the far east. The earliest Squiers are much sort after as their quality was very high, but as the brand developed and new factories opened in different regions, costs came down more along with the quality of the instruments. It's wrong to think of the Squier brand as inferior, as a well built one in the right hands can sound as good and play as well as a fully fledged Fender model.
Unfortunately though, the Squier brand does come with a slight stigma, due to its budgetary origins. As good as Squier guitars can be, most musicians will use them until they are able to afford a proper Fender. The electronics were easily accessed for repair or replacement through a removable control plate, a great advantage over the construction of the then-predominant hollow-body instruments, in which the electronics could be accessed only through the soundholes.
In its classic form, the guitar is simply constructed, with the neck and fingerboard comprising a single piece of maple, screwed to an ash or alder body inexpensively jigged with flat surfaces on the front and back. The hardware includes two single coil pickups controlled by a three-way selector switch, and one each of volume and tone controls. The pickguard was first Bakelitesoon thereafter it was celluloid later other plasticsscrewed directly onto the body with five later eight screws.
The bridge has three adjustable saddles, with strings doubled up on each. In its original design nearly all components are secured using only screws body, neck, tuners, bridge, scratchplate, pickups to body, control plate, output socketwith glue used to secure the nut and solder used to connect the electronic components.
With the introduction of the truss rod, and later a rosewood fingerboard, more gluing was required during construction. The guitar quickly gained a following, and soon other, more established guitar companies such as Gibson, whose Les Paul model was introduced inand later Gretsch, Rickenbacker, and others began working on wooden solid-body production models of their own.
Strange fender mexican tele dating
Telecaster in Pink Paisley The original switch configuration used from to allowed selection of neck pickup with treble tone cut in the first position for a bassier sound, sometimes called the "dark circuit" for its muffled soundthe neck pickup with its natural tone in the second position with no tone, and in the third switch position both pickups together with the neck pickup blended into the bridge, depending on the position of the second "tone" knob.
The first knob functioned normally as a master volume control. This configuration did not have a true tone control knob. Between and the neck could be selected alone with the "dark circuit" treble-cut sound, which disabled the tone control knob, in the middle switch the neck could be selected alone with the tone control and finally the bridge could be selected with the tone control. Although this provided the player with a proper tone control, this assembly did away with any sort of pickup combination.
Eventually from late Fender again modified the circuit for the final time to give the Telecaster a more traditional twin pickup switching system: They typically feature 22 frets rather than 21 and truss rod adjustment is made at the headstock end, rather than the body end, which had required removal of the neck on the original the Custom Shop Bajo Sexto Baritone Tele was the only Telecaster featuring a two-octave fret neck.
mexican fender serial number dating -
The three-saddle bridge of the original has been replaced with a six-saddle version, allowing independent length and height adjustment for each string. The long saddle bridge screws allow a wide range of saddle bridge positions for intonation tuning. The stamped metal bridge plate has been replaced with a flat plate, and the removable chromed bridge cover often called the "ashtray" for its secondary use has been discontinued for most models; it improved shielding but prevented players from muting strings at the bridge and made it impossible to pick near the saddles to produce the characteristic Telecaster 'twang'.
During the CBS era in the s, the Telecaster body style was changed to a new "notchless" shape, having a less pronounced notch in the crook where the upper bout meets the neck. The original model Duo-Sonics also sport a gold-colored, anodized pickguard that helps in screening the single-coil pickups and electronics from interference.
The most significant change was a switch from a maple fingerboard to a rosewood one in keeping with changes to other Fender models at this time. These fretboards were originally in the slab-style but switched to the veneer style after approximately a year. The other significant change was a switch from anodized aluminum to plastic pickguards. Third version — Duo-Sonic II — [ edit ] In the Duo-Sonic was redesigned based on the Fender Mustang that had recently been added to the student model line but without the vibrato tail-piece.
The student guitars now all featured larger and slightly offset bodies, necks with larger headstocks and rosewood fingerboards and plastic pickguards with the volume and tone controls mounted on a separate metal plate.